Category:Unassigned

Exadigm Configuration for WiFi and Combo Modems

Subject: Exadigm Configuration for WiFi + CDMA Combo Modems

 

Summary: This document outlines the step by step procedure for configuring the Exadigm hand-held Mobile Ticketing device, for communication through both WiFi and CDMA connections.

 Modem Activation:

 

 From Main Menu Select

<!—[if !supportLists]—>            · <!—[endif]—># 9 ADMIN

<!—[if !supportLists]—>· <!—[endif]—># 2 Setup enter password 1234

<!—[if !supportLists]—>· <!—[endif]—># 1 System> # 7 Power Mgmt> # 4 Device On/Off

<!—[if !supportLists]—>· <!—[endif]—># 1 USB On> No> # 2 RF On> Yes

<!—[if !supportLists]—>· <!—[endif]—># 3 Communication

<!—[if !supportLists]—>· <!—[endif]—># 3 CDMA

<!—[if !supportLists]—>· <!—[endif]—>Scroll down to A (Data Activation)

<!—[if !supportLists]—>· <!—[endif]—>Press the Enter Key Twice

 

 Requirements:

- Core: 0611011.20.000

- OS: 0691401785 (The OS is current on all devices)

- Windows Hyper Terminal

- Modem: CDMA + WiFi (MWJ3540.000)

- Router: Linksys WRT54G or WAAV X2

 

 Procedure:

<!—[if !supportLists]—>1. <!—[endif]—>Manually edit App.conf file with Merchant information.

<!—[if !supportLists]—>2. <!—[endif]—>Create A New Hudson Bind with the Customer Files.

<!—[if !supportLists]—>3. <!—[endif]—>Load Hudson Application

<!—[if !supportLists]—>4. <!—[endif]—>Open Windows Hyper Terminal, when the device starts up

select any key to get into the hermit command line. Once you

are at the hermit command line type in FFS_Erase and select

the enter key. Once that finishes type in the word linux and select

the enter key, now follow the steps on the device screen.

<!—[if !supportLists]—>5. <!—[endif]—># 4 Admin Tools> # 4 Change Settings> # 1 Set Terminal ID

<!—[if !supportLists]—>6. <!—[endif]—># 4 Admin Tools> # 4 Change Settings> # 4 Set Res #

<!—[if !supportLists]—>7. <!—[endif]—># 4 Admin Tools> # 4 Change Settings> # 5 Set Network Mode> CDMA

<!—[if !supportLists]—>8. <!—[endif]—># 4 Admin Tools> # 4 Change Settings> # 6 Set Log Level to 31

<!—[if !supportLists]—>9. <!—[endif]—># 4 Admin Tools> # 4 Change Settings> Set Batch Network Mode> WiFi

<!—[if !supportLists]—>10. <!—[endif]—> Manually configure Exadigm device settings

<!—[if !supportLists]—>11. <!—[endif]—> # 4 Admin Tools> # 3 Exadigm Admin> # 2 Setup> # 3 Communication

<!—[if !supportLists]—>12. <!—[endif]—> # 3 CDMA> CDMA Mode> WS

<!—[if !supportLists]—>13. <!—[endif]—> # 1 System> Date & Time

<!—[if !supportLists]—>14. <!—[endif]—> # 1 System> # 7 Power Mgmt> # 4 Device On/Off

<!—[if !supportLists]—>15. <!—[endif]—> # 1 USB On> Yes> # 2 RF On> Yes

<!—[if !supportLists]—>16. <!—[endif]—>Reboot Device

<!—[if !supportLists]—>17. <!—[endif]—>Test both CDMA and WiFi connections

<!—[if !supportLists]—>18. <!—[endif]—>Test all transaction types cash and credit card

<!—[if !supportLists]—>19. <!—[endif]—>Test Driver remote login and reservation upload

 

<!—[if !supportLists]—>20.Test FTP upload and download with HWebTerminalhost.

 

Categories:

• Unassigned